ROSPHERE. This means that there are 120 puffs of medicine left in the canister (See Figure 2a).
•
The pointer will be pointing between 100 and 120 after you take 10 more puffs. This means that there are 110 puffs of medicine left in the canister (See Figure 2b).
•
The pointer will be pointing to 100 after you take 10 more puffs. This means that there are 100 puffs of medicine left in the canister (See Figure 2c).
Figure 2a, 2b, and 2c
•
The dose indicator display window will continue to move after every 10 puffs. The number in the dose indicator display window will continue to change after every 20 puffs.
Figure 2d
•
The color in the dose indicator display window will change to red, as shown in the shaded area, when there are only 20 puffs of medicine left in your inhaler (See Figure 2d).
•
The dose indicator for the 7-day inhaler moves after every 10 puffs; with markings for 30, 15 and 0 puffs. The color in the 7-day inhaler dose indicator display window will change to red when there are only 10 puffs of medicine left in your inhaler.
Preparing your BEVESPI AEROSPHERE inhaler for use:
•
BEVESPI AEROSPHERE should be at room temperature before you use it.
•
Your BEVESPI AEROSPHERE inhaler comes in a foil pouch that contains a drying packet (desiccant).
° Take the BEVESPI AEROPSHERE inhaler out of the foil pouch.
° Throw away the pouch and the drying packet. Do not eat or breathe in the contents of the drying packet.
Figure 3
Priming your BEVESPI AEROSPHERE inhaler:
Before you use BEVESPI AEROSPHERE for the first time, you must prime the inhaler.
•
Remove the cap from the mouthpiece ( See Figure 3). Check inside the mouthpiece for objects before use.
•
Hold the inhaler in the upright position away from your face and shake the inhaler well ( See Figure 4).
Figure 4
•
Press down firmly on the center of the dose indicator until the canister stops moving in the actuator , to release a puff of medicine from the mouthpiece ( See Figure 5). You may hear a soft click from the dose indicator as it counts down during use.
Figure 5
•
Repeat the priming steps 3 more times (See Figure 4 and Figure 5). Shake the inhaler well before each priming puff.
•
After priming 4 times, the dose indicator should be pointing to the right of “ 120” and your inhaler is now ready to use.
Using your BEVESPI AEROSPHERE inhaler:
Step 1: Remove the cap from the mouthpiece (See Figure 6).
Figure 6
Step 2: Shake the inhaler well before each use (See Figure 7).
Figure 7
Step 3: Hold the inhaler with the mouthpiece pointing towards you and breathe out as fully as you comfortably can through your mouth (See Figure 8).
Figure 8
Step 4: Close your lips around the mouthpiece and tilt your head back, keeping your tongue below the mouthpiece (See Figure 9).
Figure 9
Step 5: While breathing in deeply and slowly, press down on the center of the dose indicator until the canister stops moving in the actuator and a puff of medicine has been released (See Figure 10). Then stop pressing the dose indicator.
Figure 10
Step 6: When you have finished breathing in, remove the mouthpiece from your mouth. Hold your breath as long as you comfortably can, up to 10 seconds (See Figure 11).
Figure 11
Step 7: Breathe out gently (See Figure 12). Repeat steps 2 through 7 to take your second puff of BEVESPI AEROSPHERE.
Figure 12
Step 8: Repla
