(Figure A)

Step 1:

•
Pull Pen cap straight off (See Figure B).
 
Step 2:

•
Check the liquid in the Pen (See Figure C). TRESIBA should look clear and colorless. Do not use it if it looks cloudy or colored.
 
Step 3:

•
Select a new needle.
•
Pull off the paper tab from the outer needle cap (See Figure D).
 
Step 4:

•
Push the capped needle straight onto the Pen and twist the needle on until it is tight (See Figure E).
 
 
Step 5:
•
Pull off the outer needle cap. Do not throw it away (See Figure F).
 
Step 6:

•
Pull off the inner needle cap and throw it away (See Figure G).
 
Priming your TRESIBA FlexTouch Pen:

 
Step 7:
•
Turn the dose selector to select 2 units (See Figure H).
 
 
Step 8:
•
Hold the Pen with the needle pointing up. Tap the top of the Pen gently a few times to let any air bubbles rise to the top (See Figure I).
 
Step 9:

•
Hold the Pen with the needle pointing up. Press and hold in the dose button until the dose counter shows “0”. The “0” must line up with the dose pointer.
•
A drop of insulin should be seen at the needle tip (See Figure J).
 
o If you do not see a drop of insulin, repeat steps 7 to 9, no more than 6 times.
 
o If you still do not see a drop of insulin, change the needle and repeat steps 7 to 9.
 
Selecting your dose:

Step 10:

TRESIBA FlexTouch Pen 200 units/mL is made to deliver the number of insulin units that your healthcare provider prescribed. Do not perform any dose conversion.

Check to make sure the dose selector is set at 0.

•
Turn the dose selector to select the number of units you need to inject. The dose pointer should line up
 
with your dose (See Figure K).
 
o If you select the wrong dose, you can turn the dose selector forwards or backwards to the correct dose.
 
o Each line on the dial is an even number.
 
•
The TRESIBA FlexTouch Pen insulin scale will show you how much insulin is left in your Pen (See Figure L).
 
•
To see how much insulin is left in your TRESIBA FlexTouch Pen:
 
o Turn the dose selector until it stops. The dose counter will line up with the number of units of insulin that is
 
left in your Pen. If the dose counter shows 160, there are at least 160 units left in your Pen.
 
o If the dose counter shows less than 160, the number shown in the dose counter is the number of units left
 
in your Pen.
Giving your injection:

•
Inject your TRESIBA exactly as your healthcare provider has shown you. Your healthcare provider should tell you
if you need to pinch the skin before injecting.
•
TRESIBA can be injected under the skin (subcutaneously) of your upper legs (thighs), upper arms, or stomach area (abdomen).
•
Change (rotate) your injection sites within the area you choose for each dose. Do not use the same injection site for each injection.
Step 11:

•
Choose your injection site and wipe the skin with an alcohol swab (See Figure M). Let the injection site dry before you inject your dose.
 
Step 12:

•
Insert the needle into your skin (See Figure N).
 
o Make sure you can see the dose counter. Do not cover it with your fingers,