•
Wash your hands with soap and water.
•
Before you start to prepare your injection, check the TRESIBA FlexTouch Pen label to make sure you are taking the right type of insulin. This is especially important if you take more than 1 type of insulin.
•
TRESIBA should look clear and colorless. Do not use TRESIBA if it is cloudy or colored.
•
Do not use TRESIBA past the expiration date printed on the label or 56 days after you start using the Pen.
•
Always use a new needle for each injection to help ensure sterility and prevent blocked needles. Do not reuse or share needles with another person. You may give other people a serious infection, or get a serious infection from them.
 
Step 1:

•
Pull Pen cap straight off (See Figure B).
 
Step 2:

•
Check the liquid in the Pen (See Figure C). TRESIBA should look clear and colorless. Do not use it if it looks cloudy or colored.
 
Step 3:

•
Select a new needle.
•
Pull off the paper tab from the outer needle cap (See Figure D).
 
Step 4:

•
Push the capped needle straight onto the Pen and twist the needle on until it is tight (See Figure E).
 
Step 5:

•
Pull off the outer needle cap. Do not throw it away (See Figure F).
 
Step 6:

•
Pull off the inner needle cap and throw it away (See Figure G).
 
Priming your TRESIBA FlexTouch Pen:

Step 7:

•
Turn the dose selector to select 2 units (See Figure H).
 
Step 8:

•
Hold the Pen with the needle pointing up. Tap the top of the Pen gently a few times to let any air bubbles rise to the top (See Figure I).
 
Step 9:

•
Hold the Pen with the needle pointing up. Press and hold in the dose button until the dose counter
 
shows “0”. The “0” must line up with the dose pointer.
•
A drop of insulin should be seen at the needle tip (See Figure J).
 
o If you do not see a drop of insulin, repeat steps 7 to 9, no more than 6 times.
 
o If you still do not see a drop of insulin, change the needle and repeat steps 7 to 9.
 
Selecting your dose:
Step 10:

TRESIBA FlexTouch Pen 100 units/mL is made to deliver the number of insulin units that your healthcare provider prescribed. Do not perform any dose conversion.

Check to make sure the dose selector is set at 0.

•
Turn the dose selector to select the number of units you need to inject. The dose pointer should line up
 
with your dose (See Figure K).
 
o If you select the wrong dose, you can turn the dose selector forwards or backwards to the correct dose.
 
o The even numbers are printed on the dial.
 
o The odd numbers are shown as lines.
 
•
The TRESIBA FlexTouch Pen insulin scale will show you how much insulin is left in your Pen (See Figure L).
 
•
To see how much insulin is left in your TRESIBA FlexTouch Pen:
 
o Turn the dose selector until it stops. The dose counter will line up with the number of units of insulin that is left in your Pen. If the dose counter shows 80, there are at least 80 units left in your Pen.
 
o If the dose counter shows less than 80, the number shown in the dose counter is the number of units left
 
in your Pen.
Giving your injection:

•
Inject yo